<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9">
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/remember-when-everyone-used-those-cheap-plastic-trowels-for-edging-bnidzu</loc>
    <lastmod>2026-04-07T12:45:05.150935+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/unpopular-opinion-i-see-way-too-many-crews-rush-the-bull-float-on-a-hot-day-just-aevl5z</loc>
    <lastmod>2026-04-06T19:20:03.580063+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/question-about-those-new-fiberglass-trowels-everyone-was-hyping-up-last-year-ztagi7</loc>
    <lastmod>2026-04-06T06:35:05.67375+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/i-finally-got-a-smooth-finish-on-that-crazy-sloped-driveway-in-phoenix-ut8y39</loc>
    <lastmod>2026-04-06T05:20:06.141015+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/tried-a-new-spray-on-curing-compound-versus-the-old-plastic-sheet-method-on-a-ga-3tiyfa</loc>
    <lastmod>2026-04-06T04:10:03.928197+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/just-realized-ive-poured-over-500000-square-feet-of-flatwork-in-my-career-zg3uxm</loc>
    <lastmod>2026-04-05T02:30:04.575691+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/pro-tip-always-check-the-forecast-before-you-start-a-pour-even-if-the-sky-looks--3wdfqb</loc>
    <lastmod>2026-04-04T10:40:06.090149+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/a-guy-on-a-site-in-boise-said-my-broom-finish-looked-like-a-nervous-chicken-and--d82ddq</loc>
    <lastmod>2026-04-03T05:05:05.132029+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/got-caught-in-a-sudden-downpour-during-a-pour-for-a-patio-in-portland-lsedpa</loc>
    <lastmod>2026-03-29T10:55:06.840777+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/a-guy-in-denver-showed-me-his-trick-for-cold-joints-n5wbdt</loc>
    <lastmod>2026-03-28T23:15:06.988297+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/got-told-my-broom-finish-was-too-rough-for-a-patio-now-i-use-a-different-method-c0l63e</loc>
    <lastmod>2026-03-28T17:40:06.905125+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/had-to-finish-a-patio-in-a-real-tight-spot-tried-something-dumb-with-a-pizza-box-li193k</loc>
    <lastmod>2026-03-28T09:30:10.411217+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/psa-the-new-city-hall-plaza-in-springfield-has-the-worst-expansion-joint-work-iv-fqsw9i</loc>
    <lastmod>2026-03-20T18:25:05.769538+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/pro-tip-i-finally-figured-out-why-everyones-broom-finish-on-sidewalks-looks-so-w-tysx1i</loc>
    <lastmod>2026-03-20T17:45:05.018596+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/a-retired-finisher-in-spokane-told-me-he-always-adds-a-cup-of-sugar-to-his-wash--zdh5ot</loc>
    <lastmod>2026-03-20T08:20:42.030393+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/pro-tip-i-stopped-using-a-power-trowel-on-every-single-pour-and-it-saved-a-job-i-w57bwb</loc>
    <lastmod>2026-03-20T02:05:07.336131+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/rant-i-was-overworking-my-bull-float-for-years-on-garage-slabs-5kkspy</loc>
    <lastmod>2026-03-19T23:15:03.409209+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/psa-an-old-timer-told-me-to-use-a-garden-sprayer-for-curing-and-i-should-have-li-tnp1f8</loc>
    <lastmod>2026-03-19T01:20:07.75714+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/just-realized-adding-a-splash-of-dish-soap-to-the-curing-water-on-a-stamped-pati-s2wv57</loc>
    <lastmod>2026-03-18T22:50:05.253494+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/tried-a-magnesium-float-versus-a-steel-one-on-a-30-yard-pour-last-thursday-qe2md7</loc>
    <lastmod>2026-03-18T16:35:05.060967+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/i-used-to-think-power-trowels-were-just-for-big-crews-until-i-tried-one-on-a-400-h7yhfu</loc>
    <lastmod>2026-03-18T08:45:11.839204+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/saw-a-sidewalk-repair-in-denver-that-used-a-weird-finish-pattern-1vjgf2</loc>
    <lastmod>2026-03-17T13:40:07.21576+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/had-to-choose-between-a-power-trowel-and-a-walk-behind-for-a-4000-sq-ft-garage-f-gqmssl</loc>
    <lastmod>2026-03-17T10:20:05.724615+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/that-pour-in-phoenix-where-the-concrete-truck-showed-up-two-hours-late-on-a-105--ytfmy5</loc>
    <lastmod>2026-03-17T09:25:04.324845+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/that-time-a-pour-in-spokane-went-sideways-when-the-vibrator-cable-got-caught-in--rl53du</loc>
    <lastmod>2026-03-17T06:30:04.276867+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/spent-800-on-a-magnesium-float-and-it-was-a-total-waste-for-my-work-4zsirl</loc>
    <lastmod>2026-03-15T12:10:09.291652+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/i-overheard-a-foreman-at-a-site-in-phoenix-say-they-skip-the-curing-compound-on--j1wm6v</loc>
    <lastmod>2026-03-13T20:30:04.640529+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/finally-got-that-broom-finish-right-on-a-big-patio-in-tacoma-1ilcfx</loc>
    <lastmod>2026-03-12T17:05:07.104095+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/psa-the-amount-of-guys-i-see-using-a-garden-hose-to-spray-down-a-slab-is-wild-xyznom</loc>
    <lastmod>2026-03-11T23:50:05.257674+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/rant-my-boss-in-phoenix-told-me-to-just-float-it-smooth-on-a-100-degree-day-last-1dfif9</loc>
    <lastmod>2026-03-09T23:45:03.539091+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/used-to-rush-the-float-stage-but-a-chat-with-an-old-timer-changed-my-game-qhdo4l</loc>
    <lastmod>2026-03-08T22:10:36.43003+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/showerthought-my-garage-floor-patch-job-looks-like-a-bad-puzzle-nfl551</loc>
    <lastmod>2026-03-08T04:35:40.546291+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/on-my-last-pour-the-homeowner-demanded-sealing-right-after-we-finished-bhsgv8</loc>
    <lastmod>2026-03-07T02:26:48.451159+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/had-a-conversation-with-a-seasoned-pro-about-finishing-concrete-before-all-the-n-4zli8v</loc>
    <lastmod>2026-03-05T00:06:35.787253+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/vent-my-toddlers-nap-schedule-forced-me-to-master-quick-finish-work-on-small-pat-4ekgs7</loc>
    <lastmod>2026-03-04T23:26:14.011761+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/boss-keeps-pushing-for-faster-finishes-and-its-ruining-our-work-pfix1t</loc>
    <lastmod>2026-03-03T00:06:07.314087+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/til-that-skipping-the-float-test-on-a-big-pour-wasted-a-full-day-8e2zqu</loc>
    <lastmod>2026-03-02T17:50:55.882039+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/hot-take-chugging-water-instead-of-soda-saved-my-last-big-slab-job-cuc65z</loc>
    <lastmod>2026-03-02T13:35:58.408807+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/update-my-first-lessons-with-a-bull-float-bcyqg3</loc>
    <lastmod>2026-03-02T05:35:53.020473+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/weather-delays-stretched-my-patio-pour-to-the-limit-409zcc</loc>
    <lastmod>2026-02-28T12:16:26.731552+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/warning-i-thought-wet-curing-was-just-extra-work-for-no-reason-2rs2zo</loc>
    <lastmod>2026-02-26T10:55:23.065705+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
  <url>
    <loc>https://topicshares.com/c/concrete-finishers/suppliers-tweaking-mixes-without-telling-us-is-becoming-a-real-headache-ocjcww</loc>
    <lastmod>2026-02-25T18:50:26.962386+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <priority>0.6</priority>
  </url>
</urlset>